Exhibit Window 5
Turn only hardware Style 180° with window handle Design-Line
Application range:
- Commercial and private buildings
- Ground deep windows with fall protection without French balcony
- Concealed hinges for the usage in design-oriented buildings
Features:
- Concealed hinge side
- Right and left version
- Gearbox with WSS exclusive handle
Technical specifications:
| Sash width: | 650 to 1.600 mm |
| Sash height: | 570 to 3.000 mm |
| Sash weight: | max. 170 kg (with load transfer) |
Adjustment range:
| Scissor: | ±2 mm lateral adjustment |
| Corner bearing: | ±2 mm lateral adjustment |
| Corner hinge: | +1,5 mm /-1 mm height adjustment |
| Locking pin: | ±1 mm compression adjustment |
Product benefits:
- 180° opening angle for turn function (max. 130kg)
- Hardware is clampable, no profile processing necessary
- Only 2 tools needed for hardware installation
- Hardware adjustment can be done with one single tool
Dual opening limiter (DIN EN 13126‑5 certified) with forced locking function and sash restriction for ground deep windows (pendulum class 3)
Features:
- Sash restrictor at the top – lockable via handle
- Dual opening limiter at the bottom
- Window can be fully opened when the handle is in the 180° position
- Opening width 100mm
Product benefits:
- Sash restriction controllable by the handle – one handed operation
- They key is not withdrawable while the sash is open. Forced locking function can be used in all turn hingesides.
- Usable with a standard half cylinder
Description:
- For inward opening turn sashes (euro groove)
- For sash weights up to 200 kg (with pairwise installation on bottom and top) and sash widths up to 1.600 mm
- Opening range individually adjustable (89/100/120 mm) via adjustable stop with anti-slam device
- Handle operated sash stop at 120mm possible
- While the handle is in the turn position the window can be opened to the preset position – after operation of the key the window can be fully opened
- Usable lock types: self-locking or forced locking function
- Usable handle types: lockable tilt-turn handle or gear handle lockable
- Certified according to DIN 13126-5:2015-01 pendulum class 3 (with pairwise installation on bottom and top) – in combination with a self-locking lock
- Sash and frame parts are clampable and screwable (frame part)
- DIN Right/left
- All parts are made of corrosion-resistant material
- Protection of the hinge side – sash locking through form closure
