Standard pivot fitting with active center locking on the hinge side
Exhibit window 6
Use cases:
- Private and public buildings
- Fall-proof floor-to-ceiling windows without baffle plate in front (French balcony)
- Adjustable hinge side with active MV, suitable for high wind loads, without additional center hinges
Equipment:
- Adjustable, visible hinge side
- Active center locking on both sides
- Can be used left / right
- Mortice gear with WSS window handle design
Adjustment range:
| DF hinge adjustable: | ±2 mm lateral adjustment |
| Corner bearing: | ±1 mm Lateral adjustment |
| Corner hinge: | +1.5 mm /-1 mm height adjustment |
| Locking pin: | ±1 mm pressure adjustment |
Technical data:
| Sash width: | from 500 to 1,600mm |
| Sash height: | 570 to 3,000mm |
| Wing weight: | max. 150 kg |
Product advantages:
- All fittings can be clamped
- No profile processing required
- Adjustable hinge side for the use of an active hinge-side center lock
- Fittings can be installed with just two tools throughout
- Adjustment of the fitting possible with just one tool
- Can be upgraded to Heavy Duty fitting (simple replacement of the hinge side) – Identical pivot points
- Fall protection due to dual opening limiter
- Opening width adjustable 89/100/120 mm
Dual opening restrictor to DIN EN 13126-5 with concealed closing system (lift lock) for floor-to-ceiling windows (swing class 3)
Equipment:
- Dual opening limiter top & bottom
- Opening width 100mm
Description:
- For inward-opening side-hung sashes (Euronut)
- For sash weights up to 200 kg with paired installation (top/bottom) and sash widths up to 1,600 mm
- Opening width individually adjustable (89/100/120 mm) via adjustable stop with safety catch (see table)
- The window can be opened up to the preset opening width by turning the handle – the window can be opened fully after the key has been operated
- can be implemented either with a self-locking lock, a lock with a locking force function or a lockable KvD window handle / rotary gear (one-hand operation)
- one version for installation at the bottom (window) or top (French window)
- One-hand operation via the window handle
- Test in accordance with DIN 13126-5:2015-01 Class 3 swing strike with paired installation (top/bottom) up to 1,200 mm sash width – in combination with self-locking lock
- Sash and frame parts can be clamped and screwed (frame part)
- Can be used right/left
- All parts made of stainless materials
