Style 180° turn fitting with Design-Line window handle
Exhibit window 5
Use cases:
- Private and public buildings
- Fall-proof floor-to-ceiling windows or baffle window in front (French balcony)
- Concealed hinge side for use in design-oriented buildings
Equipment:
- Hinge side concealed
- right and left versions
- Mortice gear with WSS window handle design
Adjustment range:
| Scissors: | ±2 mm lateral adjustment |
| Corner bearing: | ±2 mm Lateral adjustment |
| Corner hinge: | +1.5 mm /-1 mm height adjustment |
| Locking pin: | ±1 mm pressure adjustment |
Technical data:
| Sash width: | 650 to 1,600 mm |
| Sash height: | 570 to 3,000 mm |
| Wing weight: | max. 170 kg (with load transfer) |
Product advantages:
- 180° opening angle in rotating position (up to 130kg)
- All fitting parts can be clamped, no profile processing necessary
- Fittings can be installed with just two tools throughout
- Adjustment of the fitting possible with just one tool
Dual opening restrictor in accordance with DIN EN 13126-5 with closing force function and latching hold-open for floor-to-ceiling windows (swing class 3)
Product advantages:
- Handle-controlled locking of the locking limiter – One-handed operation
- The key cannot be removed when the window sash is open. Forced locking function can be used in all DF hinge sides.
- For use with standard half cylinders
Equipment:
- Top locking limiter – can be locked via handle
- Dual bottom opening limiter
- The window sash can be opened completely when the handle is in the 180° position
- Opening width 100mm
Description:
- For inward-opening side-hung sashes (Euronut)
- For sash weights up to 200 kg with paired installation (top/bottom) and sash widths up to 1,600 mm
- Opening width individually adjustable (89/100/120 mm) via adjustable stop with safety catch (see table)
- Handle-operated locking of the sash possible at 120 mm
- The window can be opened up to the preset opening width by turning the handle – the window can be opened fully after the key has been operated
- can be implemented either with a self-locking lock, a lock with a locking force function or a lockable KvD window handle/rotary gear (one-hand operation) (see accessories on page 15)
- Test in accordance with DIN 13126-5:2015-01 Pendulum impact class 3 with paired installation (top/bottom) – in combination with self-locking lock
- Sash and frame parts can be clamped and screwed (frame part)
- Can be used right/left
- All parts made of stainless materials
- Protection of the hinge side – positive locking
